- Any Mobility Print environment
- Using Mobility Print with PaperCut NG/MF
Mobility Print is compatible with PaperCut NG/MF. Use the two products together to get all the cost-cutting and document security value these products bring.
Contact us at [email protected] to download PaperCut NG or PaperCut MF for your organization.
After you install PaperCut NG/MF you need to reinstall Mobility Print.
You can find everything you need to know about installing PaperCut NG/MF in the PaperCut NG/MF Help Center (often referred to as 'the Manual').
No. Mobility Print can run 'standalone' so any users can print. However there is no user authentication or secure printing when Mobility Print is not connected to PaperCut NG/MF.
If you do want to take advantage of everything PaperCut NG/MF has to offer and end up installing it, you'll need to reinstall Mobility Print.
Most likely this is because Mobility Print is not set up to work with PaperCut NG/MF.
On its own, Mobility Print doesn't offer authentication. But when you're running Mobility Print without PaperCut NG/MF, users won't need to authenticate when printing to published printers.
You might need to install a secondary server in the same location that you installed Mobility Print. After you've installed it, you'll need to rerun the Mobility Print installer.
Mobility Print offers a unified and secure solution for printing from BYO mobile devices and laptops that are not managed by your organization (they are managed by the end user instead). There are pros and cons for all options and many of these are listed in the PaperCut NG/MF Manual. However in general, Mobility Print excels because it:
offers a native print experience with more print options
supports printing from any application (not just limited file types)
for regular users that bring their own devices, maintains the same print experience as a traditional networked desktop system with a print driver installed
is often quicker (after initial setup) to print via Mobility Print.
Mobility Print supports all printers that have drivers for modern Windows operating systems except label printers and plotters. This is because the drivers for label printers and plotters use non-standard page sizes. If you find any exceptions, or have problems, please let us know.
This might occur when a user moves from a network where their client can see the printers, to a network where it cannot. The problem is that they are trying to connect to a cached DNS record of a printer so the Mac is unable to resolve the address.
To test this, flush the DNS cache on the Mac by opening a terminal window and running "sudo killall -HUP mDNSResponder". If that doesn't help, contact support.
The Mobility Print Admin interface locale is controlled by the Internet browser's language setting.
For example, in Chrome if you want the locale used by the Mobility Print Admin interface set to en_UK, in the Languages dialog > Order languages based on your preference list, move the English (United Kingdom) option to the top of the list.
Do not install Mobility Print Server on a domain controller.
For more information, see Can I install PaperCut on a Domain Controller?
For the vast majority of organizations, you install Mobility Print on the system running the PaperCut Application Server and hosting your print queues. Some organizations have secondary print servers that you want to set up to support Mobility Print on. This configuration is supported, too, by installing Mobility Print on those secondary servers (that is, servers running the Print Provider).
Mobility Print works on Windows, macOS, and Linux print servers.
Yes. You need to install Mobility Print on each print server. For more information, see Setting up Mobility Print.
Each Mobility server is maintained independently. You can monitor your Mobility Print servers through the PaperCut NG/MF Admin web interface, but do the configuration on each Mobility Print server.
You can see a list of all Mobility Print servers in the PaperCut NG/MF Admin web interface in the Mobility Print area under Options > Mobile & BYOD. From here you can access the Mobility Print Admin web interface for each Mobility server.
You don't need to! It's automatic! We know that updating software is both important and often difficult. Updating server infrastructure is even more crucial in the BYOD and mobility space. Why? Because end user devices just update and often with little or no forewarning. To remain compatible with this fast pace, the following components auto update:
Mobility Print Server
Android Mobility Print App
Chromebook Mobility Print App
Auto update checks are performed nightly during periods of low activity (sometime between midnight and 1:00 am), and updates are applied in the background with minimal or no downtime. Updates might incorporate bug and security fixes, add new features, and improve the user interfaces.
Automatic update checks are performed over a secure HTTPS connection. No personal or system information is shared during this process. Update signatures are verified before installation.
If for some reason your print server does not have access to the internet, you can manually update any time by downloading the latest version and installing over the top of the existing version.
Printers must be renamed using the print server's operating system. Mobility server will automatically use this new name. When you change a printer's name, the change will flow through to the Mobility Print server web interface after about five minutes. You should also consider cleaning up the old print queues
Always be careful when renaming printers. If you rename a printer, Windows and macOS end users need to remove the old printer queue and add the new one into their printer list.
We use anonymous setup information to prioritize feature development and functionality to address the majority of our users' configurations. If you wish to opt out of sharing your anonymous setup configuration with PaperCut, please follow these steps:
Open the following file in a text editor:
Set the following value:
DisableAnalyticsSubmission = true
Save the file.
Restart the PaperCut Mobility Print service.
Paper size options for Mobility Print printers on ChromeOS and iOS can be displayed with ISO names (for example, "ISO_A4") instead of simple names (for example, "A4") like on Windows. This is because for each paper size provided in the printer capabilities, Mobility Print retrieves two properties: Name and CustomDisplayName. Then it passes them to the print clients.
The ChromeOS print dialog understands only the Name property. That's why it can be displayed as "ISO_A4"; it's exactly the value Mobility Print received from the printer driver. Some other printer models could provide "A4" in the Name property, so for those printers ChromeOS would display "A4" in the dialog.
Some other operating systems are able to show the CustomDisplayName, which contains in most cases contains the more friendly name.
Windows is unique; it displays its own default-supported set of paper sizes and they have user-friendly names.
Unfortunately you cannot change the port as the same port is used by all the clients. Also, it is best to run Mobility Print on a port that is not a standard port because often there is another service already running on the standard port.
If your user must access the Help Center using standard ports, ask them to go to Setting up your device and follow the steps for their device.
If your environment is set up in such a way that users have to access the Internet via a standard port, then it's best they use a specific URL for the Mobility Print Help Center. Ask them to follow the steps in Setting up your device.
Cloud Print is free.
No, Mobility Print and the Cloud Print feature are available free of charge.
Mobility Print's Cloud Print service does not access any personal information, whether it is personal metadata or print jobs, and will therefore not compromise your organization's compliance to General Data Protection Regulation (GDPR). For more information, read the Cloud Print security section.
If you're interested in what other capabilities PaperCut NG/MF provides to help your organization comply with GDPR, take a look at the PaperCut GDPR compliance guide.
Users are only prompted for credentials if you're using PaperCut NG/MF, in which case they use their existing PaperCut credentials.
No, users will have access to all printers you publish from the Mobility Print server. If you want different users to have access to different printers, then either deploy additional Mobility Print servers/VMs or use Print Deploy.
For information about STUN and TURN, see Cloud Print Security in Mobility Print.
No, there are no job size limitations in place.
Cloud Print makes use of Twillio's Global Network Traversal service. That means when a client establishes a STUN or TURN connection with the Mobility Print server, it's done over Twillio's service.
Twillio doesn't process any personal information at any level, whether it be the organizational, user, or print job level.
PaperCut MF's Cloud Services still establish the end-to-end trust between the client and Mobility Print service. Twillio is only responsible for providing the transmission channel between the two.
Using Twillio or PaperCut's MF's Cloud Services will not compromise your organization's GDPR compliance.
Currently it supports Chromebooks, with Mac and Windows devices support coming soon.
We're monitoring demand for both iOS and Android. If this is critical for your organization, let us know at [email protected]. You can still print fom your local devices on the network using Mac, Window, Chromebook, iOS and Android. For more details see...client setup homepage****
So the invite link expiration date determines at what point end users can no longer set up their devices using the link.
And the printing expiration date determines at what point printing stops for users after they have set up their client using the related invite link.
This means that you can allow a given period for users to sign up, and after that period expires no new users can sign up. The signed-up users can still print up to the printing expiration date.
For example, maybe you set up a link to allow a contractor to print for a certain period of time.
****If you're using NG/MF, you can already set up printing control.....
Not at the moment. Currently you can disable or re-enable a link that hasn't expired. It might be something we look into in future.
You can create as many new links as you like, but understanding that rolling these out again may not be what people want.
Yes. Go to the Manage Cloud Print page ......
There is no default setting. You need to explicitly click No expiry or select a specific date.
Yes, if you'ree using Mobility Print together with PaperCut NG/MF.
When it comes to scale, you need to consider two ends. PaperCut MF's Cloud Services and your Mobility Print server.
PaperCut MF's Cloud Services are built on top of Google Cloud Platform and also makes use of Twillio's Global Network Traversal service. The Cloud Print service scales horizontally and can handle pretty much any load thrown at it.
In regards to your Mobility Print server, there are a few factors to consider, including:
the typical document size being printed
your internet speed
the server capacity.
If you have a decent machine with a decent network connection, then you should be fine with around 10,000 print jobs a week. If you are expecting more than this, especially if you expect spikes in printing, then consider deploying multiple Mobility Print servers.
At the moment you can't yet deploy multiple Mobility Print servers in an active-active configuration to process your cloud print jobs. Instead, you will have to segment your usage and send different users invite links to different Mobility Print servers.
That's because Mobility Print couldn't detect a PaperCut Print Provider running on the server you installed Mobility Print on. Mobility Print requires a Print Provider to connect it to the PaperCut Application Server.
If you already have PaperCut NG/MF installed, ensure you install Mobility Print on the same machine as the PaperCut Print Provider.
This can be your PaperCut NG/MF Application Server or a secondary print server. If it's a secondary server, ensure it has a Print Provider installed on it.
After the Print Provider is installed on the server, rerun the Mobility Print installer and it will connect with your existing PaperCut Application Server.
Account selection works in the same way as it does for any other PaperCut Mobile & BYOD solution. Users can assign an account at the MFD, via the User Client, or via the Mobile web client (or Mobile web client - web clip (for iOS devices). For more information, see Configure cost allocation
If your current solution meets all of your needs you don't have to migrate to Mobility Print. However, Mobility Print offers the following advantages over iOS Printing:
Mobility Print also supports Android, Chrome, and Windows (iOS Printing supports only iOS and macOS).
You can use a Windows print server.
The following Knowledge Base article outlines a migration process to move from iOS Printing.
Yes, you need to upgrade Papercut NG/MF on your secondary print servers to be version 17 or greater.
Yes! You can set up Mobility Print on any Windows secondary server, including sites with a Site Server instead of an Application Server. With PaperCut 17.0, you need to perform a few extra setup steps to get this working. For more information, see Set up Mobility Print with a Site Server.
If you are running PaperCut NG/MF 17.1 or higher Yes. Otherwise there must be a connection between the Site Server and the Application Server for Mobility Print to work. See Set up Mobility Print with a Site Server
Currently Mobility Print doesn't check the Printer Properties options on a print queue to see what the default is. It ignores the color and duplex settings.
For example, if you set the properties on the print server to Black and White, on the client device adding the printer it will be set as color by default.
We have an open feature request to be able to have more control over the print queue defaults.
In a managed environment, there are two ways you can enforce these printing preferences:
All PaperCut NG/MF configured print attribute conversions (for example, converting color jobs to black and white) work when you use Mobility Print.
All print restrictions work, however notifications of "denied jobs" might be limited depending on your notification settings.
For example, if notifications are delivered by the client software only, end users using a mobile phone or Chromebook will not know that their job has been denied. Some restrictions, such as group access, are checked immediately at the time of print. These restrictions are always applied and users will be aware of them.
For more information, see Configure system notifications.
All user login credentials are secure and encrypted. Where possible, industry standard HTTPS/TLS is used. Print jobs on Android, macOS, and iOS are secure as they use HTTPS. Print jobs on Chromebooks are encrypted using AES with a 256-bit key length.
Of course! Mobility Print supports secure print release and find-me printing.
Absolutely. Mobility Print has the same level of security and authentication as any other PaperCut NG/MF feature. User identification is checked before a job is accepted. See User authentication in How it works for details.
The answer to this question depends on your device.
- iOS - You need to enter your login details the first time you print, then your device will remember your details forever. On iOS 10, you can, however, ask your device to forget your details. To do this:
When you print from your device, a Printer List is displayed. Tap the Information icon next to a printer.
At the bottom of the Details screen, tap Forget my Username and Password.
macOS - On the login screen, there's an Add to keychain checkbox. If you select this checkbox, your login details will be remembered forever. If you come across "hold for authentication" when printing, see Hold for Authentication KB article for more details.
Windows - You do not need to enter your login details when you print a job; you enter them only once, when you add a printer.
ChromeOS - On the login screen there's a Remember me checkbox. If you select this checkbox, your login details will be remembered for the selected printer for 30 days.
Android - On the login screen there's a Remember me checkbox. If you select this checkbox, your login details will be remembered for the selected printer for 30 days.